| Specification |
Type: Inertial Measurement Unit;
Output Signal Type: Digital Output;
Measuring Shaft Quantities: 6;
Accuracy Grade: 1degree/H;
IP Rating: IP67;
Customized: Non-Customized;
Range: Gyro: +-450deg/S, Acc: +-16g(Z Axis +-50g);
Bias Instability: Gyro: 1deg/H, Acc: 30ug(+-16g);
Working Temperature: -40~+85degc;
Interface: Uart, Spi;
|
Type: Servo;
Output Signal Type: Digital Output;
Measuring Shaft Quantities: 6;
Accuracy Grade: 0.1G;
IP Rating: IP65;
Customized: Customized;
Gyro Measuring Range: ±250°/S (up to 500°/S);
Gyro Zero Bias Stability: 3°/H, Allan Variance;
Accelerometer Measuring Range: ±4G (up to 16g);
Accelerometer Zero Bias Stability: ≤0.065mg, Allan Variance;
Vibration: 20~2000Hz, 3G;
Impact: 1000g, 0.5ms;
|
Type: Servo;
Output Signal Type: Digital Output;
Measuring Shaft Quantities: 6;
Accuracy Grade: 0.1G;
IP Rating: IP65;
Customized: Customized;
Gyro Measuring Range: 2000°/S (Turntable);
Gyro Zero Bias Stability: 10°/H, 10s Average, +70, +20, -40ºC;
Gyro Bandwidth: 200Hz, 3dB;
Accelerometer Measuring Range: 16, 200g;
Accelerometer Zero Bias Stability: 0.5mg, 10s Average, +70, +20, -40ºC;
Accelerometer Bandwidth: 200Hz, 3dB;
|
Type: \;
Output Signal Type: Digital Output;
Measuring Shaft Quantities: 6;
Accuracy Grade: 0.1G;
IP Rating: IP65;
Customized: Customized;
Gyro Measuring Range: ±500°/S;
Gyro Zero Bias Stability: 30°/H, 1s Smooth, 1σ;
Gyro Bandwidth: 345Hz (-3dB);
Accelerometer Zero Bias Stability: ±8g;
Accelerometer Measuring Range: 0.3mg, Q=6, 1σ;
Accelerometer Bandwidth: 393Hz (-3dB);
|
Type: Piezoelectric;
Output Signal Type: Analog Output;
Accuracy Grade: 0.5G;
IP Rating: IP65;
Customized: Customized;
Sensor Type: Piezocrystal;
Frequency response(±1dB): 5~1000Hz;
Amplitude of nonlinearity: ±2%;
Transverse sensitivity rate: ≤5%;
Supply voltage: 15~36VDC (Normally 24);
Operation temp: -40~85℃;
limit of impact(peak value): 1000;
Weight: about 180g;
Shell material: stainless steel;
Sensitive element: Ceramic shear;
Connection cable: D13~3 meters;
|