| Specification |
Type: Fire Alarm Host;
Function: Networked;
Usage: Door, Window, Fire, Smoke;
Alarm Volume (within 1m): ≥80dB;
Networking Mode: Wired;
Wiring Mode: Sub-Line System;
Alarm Zone Circuits: 2,4,8,16;
Number of Connected Devices Per Zone: 32;
Standby Battery Capacity (2xdc 12V): 7.2ah;
Number of Programmable Output Relays: 2;
Ancillary Fire C/O Relay: 2;
Ancillary Fault N/C Relay: 1;
Number of Networked Panels: 4;
|
Type: Fire Alarm Host;
Function: Networked;
Usage: Auto, Fire, Smoke;
Alarm Volume (within 1m): ≥100dB;
Networking Mode: Dial-up;
Receive Frequency: Wire;
Wiring Mode: Sub-Line System;
Primary AC: 90-270 AC 50/60 Hz;
Number of System Zones: 4 Zone;
Panel Weight: 4kg;
Extinguishant Release Output: 2 AMP@28VDC;
Alarm Zone End of Line (Ohms): 10K;
|
Type: Fire Alarm Host;
Function: Networked;
Usage: Fire, Smoke;
Alarm Volume (within 1m): ≥100dB;
Networking Mode: Alarm;
Receive Frequency: 485/232;
Wiring Mode: Sub-Line System;
Weight: 7kg;
Color: Red;
Number of Zones: 4;
Primary AC: 90-270VDC;
Standby Battery: 2*12V;
|
Type: Fire Alarm Host;
Function: Non-Networked;
Usage: Fire;
Alarm Volume (within 1m): ≥100dB;
Receive Frequency: 315MHz;
OEM/ODM Service: Available;
Operating Voltage: 220V AC;
for Fire Panel Type: Conventional;
|
Type: Fire Alarm Host;
Function: Networked;
Usage: Auto, Fire, Smoke;
Alarm Volume (within 1m): ≥100dB;
Networking Mode: Dial-up;
Receive Frequency: Wire;
Wiring Mode: Sub-Line System;
Main Supply: 90-270VAC, 50/60 Hz;
Number of System Zones: 4 Zone;
Panel Weight: 5kg;
Extinguishant Release Output: 21V-28VDC. Maximum Load 2 AMP;
Alarm Zone End of Line (Ohms): 10K;
Power Supply Rating: 3 AMPS Total Including Battery Charge 28V+/-2V;
Battery Type: Two 12 Volt Sealed Lead Acid in Series;
Battery Charge Voltage: 27.6VDC Nominal;
Battery Charge Current: 0.7A Maximum;
Maximum Current Draw From Battery: 3AMPS;
Fault Relay Contact Rating: 2A /30VDC Maximum for Each;
Fire Relay Contact Rating: 2A /30VDC Maximum for Each;
First Stage Contact Rating: 2A /30VDC Maximum for Each;
Second Stage Contact Rating: 2A /30VDC Maximum for Each;
Extract Contact Rating: 2A /30VDC Maximum for Each;
|