What is High Precious Plastic Injection Mould for ABS Components
Price
Min. Order Reference FOB Price
1 Set US$2,000.00-10,000.00 / Set
Sepcifications
- Warranty Any Question Please Feel Free to Contact Us.
- Shaping Mode Injection Mould
- Surface Finish Process Polishing
- Mould Cavity Multi Cavity
- Plastic Material ABS
- Process Combination Type Single-Process Mode
- Application Car
- Runner Cold Runner
- Design Software Pro-E
- Installation Semi Fixed
- Certification ISO
- Standard HASCO
- Customized Customized
- After-sales Service Any Question Please Feel Free to Contact Us.
- Transport Package Wooden Box Packing
- Specification Custom
- Trademark HOWE or Custom
- Origin China
- Mould Life >300 Thousand Times
- Material of Steel S136, S136h, 718h, Ramax 168
- Gate Type Side Gate, Sub Gate, Pin Point Gate, Edge Gate etc
- Lead Time 15-45 Working Days
- Injection Machine Tonnage 50t-3600t
- OEM/ODM Welcomed
Product Description
Product Description Product Name OEM custom injection mould car parts Metal Material Aluminium, Steel, Stainless steel, Copper, Magnesium, Cast iron, Zamak, etc Plastic Material ABS,PC,POM,PMMA,NYION,ABS+PC,PBT,PBT+GF30,PA6+GF30,PEEK,PEI,Bakelite. Color Customized (painting or ...
-
What Is Injection Molding Shrinkage?By Dongguan Howe Precision Mold Co.,LTD on 13/08/2024Injection molding shrinkage simply refers to how much the polymers will contract during the cooling phase. During the injection molding process, molten plastic material is injected into a mold cavity under high pressure, and when the plastic material cools, it shrinks as it solidifies. This shrinkage can cause the molded part to be smaller than the intended size, and have an uneven shape known as war-page. -
What Are Sink Marks in Plastic Injection Mold?By Dongguan Howe Precision Mold Co.,LTD on 11/09/2024Sink marks are some kinds of depression on the surface of the plastic part due to the shrinkage of the material underneath. Sink marks most commonly occur on a surface that has ribs, bosses, and other voluminous features on the rear side of the moulding. All plastics shrink as they freeze off, some more than others. One of the things you can do during the design phase is to identify where these injection molding sink marks are going to be and choose a material that doesn’t shrink as much. Or you can even add something to the plastic material like glass fibers or you can put talcum powder in and it will mitigate the shrinkage quite a bit. -
What Are Bubbles in Injection Molded Products?By Dongguan Howe Precision Mold Co.,LTD on 13/08/2024In injection molding, bubbles are not a common defect in general small workshops. Bubbles mainly occur in non-large transparent products; small transparent products are not prone to bubbles, while non-transparent products typically do not have specific requirements. Today, we will focus on bubbles in injection molding as we continue our exploration of molding defects.