What is Customization Injection Molds for Bulk Plastic Tray in Guangdong
Price
Min. Order Reference FOB Price
1 Piece US$2,000.00-20,000.00 / Piece
Sepcifications
- Warranty 500,000 to 1,000,000cycles Lifetime
- Shaping Mode Injection Mould
- Surface Finish Process Polishing
- Mould Cavity Single Cavity
- Plastic Material PBT
- Process Combination Type Single-Process Mode
- Application Household Appliances, Home Use
- Runner Cold Runner
- Design Software UG
- Installation Fixed
- Certification ISO
- Standard HASCO
- Customized Customized
- After-sales Service 24hrs Online Service
- Transport Package Carton
- Specification Custom
- Trademark HOWE or Custom
- Origin China
- Name Plastic Tray Toolings
- Design Sofeware Ug, Proe, CAD, Solidwork, etc
- Mold Life Time 300, 000~1, 000, 000 Times
- Product Weight 50~5000g
- Molding Material ABS, PA6, PA66, PP, PETG, PC, etc
- Lead Time 7-14 Days for Samples, 25-40 Days for Mould
- Manufacture Type Plastic Injection Mold, Molding
Product Description
Rectangle Plastic Food Tray Factory, a hub of innovation nestled in the bustling heart of Guangdong, where cutting-edge design seamlessly meets practical utility. Product Description Plastic of Origin GUANGDONG Brand Name Customazition Plastic Material PBT Color Customized color Usage ...
-
What Are Bubbles in Injection Molded Products?By Dongguan Howe Precision Mold Co.,LTD on 13/08/2024In injection molding, bubbles are not a common defect in general small workshops. Bubbles mainly occur in non-large transparent products; small transparent products are not prone to bubbles, while non-transparent products typically do not have specific requirements. Today, we will focus on bubbles in injection molding as we continue our exploration of molding defects. -
What Is Injection Molding Shrinkage?By Dongguan Howe Precision Mold Co.,LTD on 13/08/2024Injection molding shrinkage simply refers to how much the polymers will contract during the cooling phase. During the injection molding process, molten plastic material is injected into a mold cavity under high pressure, and when the plastic material cools, it shrinks as it solidifies. This shrinkage can cause the molded part to be smaller than the intended size, and have an uneven shape known as war-page. -
What Are Sink Marks in Plastic Injection Mold?By Dongguan Howe Precision Mold Co.,LTD on 11/09/2024Sink marks are some kinds of depression on the surface of the plastic part due to the shrinkage of the material underneath. Sink marks most commonly occur on a surface that has ribs, bosses, and other voluminous features on the rear side of the moulding. All plastics shrink as they freeze off, some more than others. One of the things you can do during the design phase is to identify where these injection molding sink marks are going to be and choose a material that doesn’t shrink as much. Or you can even add something to the plastic material like glass fibers or you can put talcum powder in and it will mitigate the shrinkage quite a bit.