| Specification |
Type: Medium & High Temperature Pressure Transmitter;
Structure Type: Diffused Silicon Pressure Transmitter;
Measuring Medium: Liquid, Gas, Stream;
Accuracy Grade: 0.5G;
Pressure range: 0~50kpa…40MPa;
IP Rating: IP65;
Customized: Customized;
Temperature Range: -40~100℃;
Overload: 1.5 Times Pressure Range of Full Scale;
Accuracy(Pressure): ±0.5%Fs(Typical);±0.2%Fs(Optional);
Output: 4~20mA + One or Two Way PNP or NPN;
Accuracy(Temperature): ±0.4℃;
Power Supply: 24V DC;
Process Connection: Male Thread(M20X1.5, NPT1/2, etc);
Electronical Connection: M12X1, DIN43650, etc;
Temperature Probe: on Demand;
Protection Level: IP65;
|
Type: Medium & High Temperature Pressure Transmitter;
Structure Type: Strain Gauge Pressure Transmitter;
Measuring Medium: Liquid;
Accuracy Grade: 0.5G;
Pressure range: 0~10MPa -40~100℃;
IP Rating: IP67;
Customized: Customized;
Range: 0~0.5m~20m;
Overpressure: 1.5 Times Fs(Min. Value Is Valid);
Pressure Type: Gauge, Absolute or Sealed Gauge;
Operation Temp.: -20ºC~85ºC;
Power Supply: 9~36VDC;
Output Signal: 4~20madc;
|
Type: Medium & High Temperature Pressure Transmitter;
Structure Type: Ceramic Pressure Transmitter;
Measuring Medium: Liquid;
Accuracy Grade: 0.5 1.0 1.5;
Pressure range: -0.1MPa...0kpa~10kpa...10MPa;
IP Rating: IP66;
Customized: Customized;
Output 1: 4mA~20mA;
Output 2: 0~10V(Output Range Can Be Customized);
Pressure Accuracy Level: 0.1(Custom Made), 0.25, 0.5;
Pressure Interface: G1/2;
Keywords: Output Integrated Temperature Transmitter;
Supply Voltage: +12VDC~+30VDC(Calibration Value Is +24VDC);
|
Type: Explosion-proof Pressure Transmitter;
Measuring Medium: gases and liquids;
Customized: Non-Customized;
Series: Compatible gases, steam, liquids or vapors;
Accuracy ±%: ±0.075;
Temperature Limits: Process: -40 to 248°F (-40 to 120°C); Ambient: Wit;
Stability: ±0.125% FSO/yr;
Output Signal: 4-20 mA;
Electrical Connections: Two 1/2" female NPT conduit, screw terminal;
Process Connections: 1/2" female NPT;
Wetted Material: 316L SS;
Rangeability: 100:1 turn down;
Thermal Effect: ±0.125% span/32°C;
Power Requirements: 11.9-45 VDC;
Response Time: 0.12 s;
Damping Time: 0.25 to 60 s;
Loop Resistance: Operation: 0 to 1500 Ω; HART® Communication: 250 t;
|
Type: PROCESS FILTER GAGE;
Measuring Medium: Gas;
Customized: Non-Customized;
Service: Liquids/gases compatible with SS, GFN, and fluorop;
Wetted Materials: Aluminum, SS, glass filled nylon, and fluoropolyme;
Accuracy: ±5%FS;
Pressure Limits: 300 psig (20.7 bar);
Temperature Limits: 200°F (93°C);
Process Connections: 1/8" female NPT;
Mounting Orientation: Any orientation with 10-32 threaded holes 3/4" apa;
Green Zone: PFG2-02: 0 to 2.5 psid; PFG2-03: 0 to 5 psid; PFG2;
Yellow Zone: PFG2-02: 2.5 to 3.75 psid; PFG2-03: 5 to 7.5 psid;;
Red Zone: PFG2-02: 3.75 to 5 psid; PFG2-03: 7.5 to 10 psid;;
|