| Specification |
Application: Aerospace Industry, Appliance Industry, Automotive Industry, Construction Industry, Electronics Industry, Furniture Industry;
Coating Type: Powder Coating;
Heating system: Diesel, electric, gas, LPG;
Warranty: Two Years;
Name: Automatic Powder Coating Line;
Control System: PLC Touch Screen;
After Sales: Engineers Available Overseas;
Powder Recovery: 99.2%;
Maintenance: Easy, Lower Cost;
Coating Color: Customers' Requirement;
Powder Recovery Rate: 98%;
Keyword: Industrial Coating Line;
Recovery: More Than 94%;
Color Change: Fast Color Change;
Heating Energy: Gas/Electric/Diesel/LPG;
Usage: Metal Surface Coating;
|
Application: Aerospace Industry, Appliance Industry, Construction Industry, Electronics Industry, Furniture Industry;
Coating Type: Anti-corrosion Coating;
Heating system: Diesel, electric, gas, LPG;
Warranty: One-Year Warranty;
Enamel Layer Thickness: 80-150μm (Tolerance ±3μm);
Coating Uniformity: ≥98% (No Localized Thickness Variations);
Firing Temperature: 800-950°C (Temperature Control Accuracy ±2°C);
Furnace Temperature Uniformity: ≤±5°C;
High-Temperature Enamel Firing Time: 4-10 Min, Adjustable Based on Workpiece Thickness;
Degreasing Tank Temperature: 50-60℃ (Treatment Time 15-20 Min);
Phosphating Film Thickness: 5-8μm (Adhesion ≥5n/Cm, Compliant with ASTM D3359;
Applicable Workpieces Categories: Water Heater Liners, Cast Iron Pots etc;
Applicable Workpieces Materials: Carbon Steel, Cast Iron, Stainless Steel (304/316L;
Production Capacit: 80-350 Units/H/Module (Based on 50L Inner Tank);
Energy Consumption Level: <=8kw.H/Unit;
Firing Furnace Thermal Efficiency: ≥85% (Including Waste Heat Recovery);
Power Supply: 440/380V/50Hz, 220V/60Hz (Customizable);
Temperature: 5-40°C;
Relative Humidity: ≤85% (Non-Condensing);
|
Application: Aerospace Industry, Appliance Industry, Construction Industry, Electronics Industry, Furniture Industry;
Coating Type: Anti-corrosion Coating;
Heating system: Diesel, electric, gas, LPG;
Warranty: One-Year Warranty;
Enamel Layer Thickness: 80-150μm (Tolerance ±3μm);
Coating Uniformity: ≥98% (No Localized Thickness Variations);
Firing Temperature: 800-950°C (Temperature Control Accuracy ±2°C);
Furnace Temperature Uniformity: ≤±5°C;
High-Temperature Enamel Firing Time: 4-10 Min, Adjustable Based on Workpiece Thickness;
Degreasing Tank Temperature: 50-60℃ (Treatment Time 15-20 Min);
Phosphating Film Thickness: 5-8μm (Adhesion ≥5n/Cm, Compliant with ASTM D3359;
Applicable Workpieces Categories: Water Heater Liners, Cast Iron Pots etc;
Applicable Workpieces Materials: Carbon Steel, Cast Iron, Stainless Steel (304/316L;
Production Capacit: 80-350 Units/H/Module (Based on 50L Inner Tank);
Energy Consumption Level: <=8kw.H/Unit;
Firing Furnace Thermal Efficiency: ≥85% (Including Waste Heat Recovery);
Power Supply: 440/380V/50Hz, 220V/60Hz (Customizable);
Temperature: 5-40°C;
Relative Humidity: ≤85% (Non-Condensing);
|
Application: Appliance Industry;
Coating Type: Anti-corrosion Coating;
Heating system: Diesel, electric, gas, LPG;
Warranty: One-Year Warranty;
Furnace Temperature: 830-900℃ Optimal Range for Enamel Frit Melting;
Temperature Control Accuracy: ±2℃;
High-Temperature Zone: ≤±5℃ (at Any Point in The Furnace);
Degreasing Temperature: 50-60℃ (Processing Time 15-20min);
Pickling Temperature: 40-50℃ (for Rusty Workpieces);
Drying Temperature: 80-120℃ (Drying Time 10-40min);
Power Supply: 440/380V/50Hz, 220V/60Hz;
Workpiece Materials: Carbon Steel/ Stainless Steel;
Applicable Workpieces: Water Heater Tank;
Physical Pre-Treatment: Shot Blasting/ Manual;
Enamel Dry Film Thickness: 150-500μm;
Adhesion: ≥5n/Cm;
Salt Spray Resistance: ≥500 Hours;
Capacity: 80-300 Pieces / Hour (50L Tank);
Energy Consumption Per Unit Product: ≤8 Kw·H / Piece;
|
Application: Appliance Industry;
Coating Type: Anti-corrosion Coating;
Heating system: Diesel, electric, gas, LPG;
Warranty: One-Year Warranty;
Furnace Temperature: 830-900℃ Optimal Range for Enamel Frit Melting;
Temperature Control Accuracy: ±2℃;
High-Temperature Zone: ≤±5℃ (at Any Point in The Furnace);
Degreasing Temperature: 50-60℃ (Processing Time 15-20min);
Pickling Temperature: 40-50℃ (for Rusty Workpieces);
Drying Temperature: 80-120℃ (Drying Time 10-40min);
Power Supply: 440/380V/50Hz, 220V/60Hz;
Workpiece Materials: Carbon Steel/ Stainless Steel;
Applicable Workpieces: Water Heater Tank;
Physical Pre-Treatment: Shot Blasting/ Manual;
Enamel Dry Film Thickness: 150-500μm;
Adhesion: ≥5n/Cm;
Salt Spray Resistance: ≥500 Hours;
Capacity: 80-300 Pieces / Hour (50L Tank);
Energy Consumption Per Unit Product: ≤8 Kw·H / Piece;
|
