| Specification |
Type: Universal Testing Machine;
Accuracy Grade: 1.5;
Load Way: Electronic Load;
Display: Digital;
Control: Manual Control;
Weight: 150kg;
Power Source: AC220V;
Capacity(kVA): 1.5-50;
Regulator Capacity(kVA): 1-30;
Working Time: 5;
Output(Kv): 50-400;
|
After-sales Service: Long Life;
Warranty: 1 Year;
Type: Insulation Resistance Tester;
Display: LCD;
Control: Computer Control;
Power Source: Alkaline Battery;
Output Voltage: 500V, 1000V, 2500V, 5000V.10000V;
Short Circuit Current: ≥10mA;
Measure The Voltage (Kv): Nominal Voltage *(1±10%);
Capacitance Cx: 0.01-10UF;
Dar.Pi Measuring Range: Measuring Range: 0.01 ~9999.99;
Output Voltage Display Error: ±(3%Rdg + 1d);
Anti-Interference Capability: 50 Ma(Induced Voltage 2000V)AC 50Hz;
Insulation Resistance: 50 M (10kv);
Withstand Voltage: AC 3kv 50Hz 1min;
Power Supply: Lithium Battery;
Charging: AC 220V (1±10%);
Standard: IEC61010-1:2001;
|
After-sales Service: Suppor for Lifelong;
Warranty: 1 Year or Extend;
Type: Vlf Hipot Tester;
Accuracy Grade: 0.5;
Load Way: Electronic Load;
Loading Method: Dynamic Load;
Display: LCD;
Control: Computer Control;
Weight: Depends;
Power Source: AC220V;
Output Frequency: 0.1Hz, 0.05Hz, 0.02Hz;
Stability of Frequency: Fluctuation < 0.5%;
Measurement Accuracy: +-3%;
Positive and Negative Voltage Peak Error: <=3%;
Voltage Waveform Distortion: <=5%;
Humidity: <=85%;
Product Name: Vlf Hipot Tester;
Test Voltage Range: 30kv/40kv/50kv/60kv/70kv/80kv;
Standard: IEC;
Test Sample: Cable, Transformer, Switchgear, etc;
|
Warranty: 1 Year;
Type: Strength Testing Machine;
Accuracy Grade: 0.2;
Display: LCD;
Weight: 10kg;
Power Source: AC220V;
Test Current: 10A;
Humidity: <90%;
Product Name: DC Resistance Test;
Testing Current: 1mA,10mA,1A,5A,10A;
Testing Precision: ±(0.2%Full-Scale± 2 Digital);
Display Mode: 128×64DOT-Matris;
Highest Resolution Ratio: 0.1μΩ;
Power Supply: AC 220V±22V;
Maximum Power Dissipation: 220W;
Standard: IEC;
|
After-sales Service: Life Time Support;
Warranty: 1 Year or Extended;
Type: AC Resonant Test System;
Accuracy Grade: RMS 1.5;
Display: Digital;
Control: Controller or Computer;
Power Source: 220V/380V,10 %Single Phase, 50Hz;
Frequency: 20Hz-300Hz;
Waveform: Sine;
Protection: Over-Current, Over-Voltage,Flash-Over;
Mode: Automatic and Manual Operation Mode;
Print: Support;
Tested Object: Cable, Gis, Transformer, Gil,Ect;
Test Time: 1hours or Customized;
Using Place: Outdoors or Indoors;
Partial Discharge: PC Less Than 10PC Support;
Cabliration Report: Factory Report or The Third -Party Support;
Max Test Voltage: up to 10000kv or Higher;
Max Capacity: up 10000kVA or Higher;
Product Name: AC Resonant Test System;
Calibration: Support Calibration;
|
