| Specification |
After-sales Service: 12month Warranty,Lifelong Technical Service;
Function: Motion Simulator;
Display: Digital;
Usage: Electric Component Tester, Inertial Sensors Testing;
Type: Component Tester;
Environment: Room Temperature;
Warranty: With Warranty;
Power Source: AC 85V-265V;
Weight: 〉10Kg;
Installation: Direct Connected;
Customized: Customized;
Dimensions: (Height)H≤2m,(Width)W≤1.2m;
Three-Axis Non-Intersection Degree: R≤0.3mm;
Structure: Three-Axis (Azimuth, Pitch, Roll), Uuo Structure;
Dimensions of Installation Surface: ≤φ500mm;
Angular Motion Range Is Not Less Than: Azimuth: ±60° Pitch: -45°~+120° Roll: ±150°;
Maximum Load: ≥40kg;
Maximum Angular Velocity: Azimuth: ≥100°/S Pitch: ≥150°/S Roll: ≥150°/S;
Static Angular Position Accuracy: ≤0.005°(Azimuth, Pitch, Roll);
Maximum Angular Acceleration: Azimuth: ≥320°/S² Pitch: ≥320°/S² Roll: ≥710°/S²;
|
After-sales Service: yes;
Function: Storage;
Display: Digital;
Usage: DC Resistance Tester;
Type: Resistance Tester;
Environment: Room Temperature;
Warranty: With Warranty;
Power Source: AC 85V-265V;
Weight: 0-10Kg;
Installation: Direct Connected;
Customized: Customized;
Power input: AC 220V±22V, 50Hz±2 Hz;
Testing current: 1mA 10mA 1A 5A;
Measuring range: 1ohm-20K ohm(1mA), 1ohm-2K ohm;
Accuracy: ±0.2% of full range ±2digit;
Data storage: 255PCS;
Display mode: 4 1/2 digit;
Max.resolution: 0.1μΩ;
|
After-sales Service: Yes;
Function: check;
Display: Digital;
Usage: Electric Component Tester;
Type: Electric Inductance Measuring Tester;
Environment: Room Temperature;
Warranty: 1 year;
Power Source: DC 100V-300V;
Weight: 〉10Kg;
Installation: Direct Connected;
Customized: Non-Customized;
Current display: Maximum current 30A, resolution: 0.01A;
Instrument power supply: AC/DC 220V±10%; 50Hz±2%;
External trigger voltage: AC/DC10-300V, current≤120A;
Operating Environment: -20℃~+50℃;
Relative humidity: ≤90%;
|
After-sales Service: yes;
Display: Digital;
Usage: gas content analyzer of insulation oil;
Type: Transformer Tester;
Environment: Room Temperature;
Warranty: With Warranty;
Power Source: AC 85V-265V;
Temperature control range: room temperature 5-400℃;
Temperature increasing steps : 16 steps;
Increasing speed: 0.1-40℃/min;
External event: 4 channels;
Detector: FID, TCD, ECD(optional), FPD(optional);
|
After-sales Service: 7*24 Online Service/Change New;
Function: Locating;
Display: Digital;
Usage: Calbe Fault Detector;
Warranty: With Warranty;
Power Source: AC200-240V;
Weight: 〉10Kg;
Installation: Direct Connected;
Customized: Customized;
Output Voltage: 30kv ~ 90kv;
Output Frequency: 0.1Hz, 0.05Hz, 0.02Hz;
High Test Capacity: 5.5μf;
Measuring Length Range: Over-Current Protection.;
Measuring Method: Low-Voltage Pulse Method, Flash Current Method, Mu;
Blind Spots: 0 ~ 5m or No Blind Spots;
Standby Time: Can Be Used Continuously for About 6 Hours;
Control Unit Weight: 7kg;
|